Thông tin chung
Payback within 6-24 months after implementation
Our Infrafone cleaners (low-frequency acoustic cleaning) improves the profitability of boilers. This has been achieved thru more efficient soot cleaning in e.g. economizers, air-preheaters and catalysts (SCR’s), with a general payback time of about 6 to 24 months. Traditional soot cleaning technologies such as steam sootblowing, shot cleaning, sonic cleaning (high frequency), and manual cleaning are generally heavily reduced or eliminated in these applications.
Our range of products is the result of our unique knowledge and our customer focus. We calculate the optimal size and design of the acoustic cleaner for each customer’s particular need and the spatial possibilities of each installation.
Hãy xem nó hoạt động như thế nào
Những thông tin chính
Higher efficiency
From automatic, frequent preventive cleaning of heating surfaces and catalysts.
50-75 %
Reduced steam sootblowing, increasing asset lifetime by less wear and higher efficiency
Stable operation
From more frequent and preventive cleaning
Does Infrasound sound interesting?
Talk to one of our experts to see if Infrasound Cleaning would be a fitting solution for you.
Tải xuống
Infrasound cleaning case studies
Skogsbacka Kraftvärmeverk, Lycksele Sweden
Skogsbacka Kraftvärmeverk was using steam soot blowing in the economizer once every 24 hours prior to the installation of the infrasound generator. The performance of the existing soot blowers was not satisfying and the cost for maintenance of the soot blowing system was considered too high
Perstorp Fjärrvärme P6, Perstorp Sweden
At Perstorp Fjärrvärme, Steam soot blowing was previously used six times per day in the economizer and there were also two unplanned stops per year for manual cleaning. The unplanned stops are costly and are preceded by an increased differential pressure which increases the flue gas velocity, leading to increased erosion and uneven flue gas distribution.
Renova, Göteborg Sweden
Renova Göteborg used shot cleaning in the economizer to keep the tube package clean. The customer made an evaluation of the shot cleaning and concluded it posed a major safety risk.
Stadtwerke Gießen, Gießen Germany
A case study and results from our infrasound cleaning installation on a WtE boiler at Stadtwerke Gießen. After 3 months the need for steam soot blowing was 8 times per 24 h and after 6 months 18 times per 24 h. The steam for the soot blowers is bought from the neighbouring plant operating a gas fired boiler so a reduction of the need for steam soot blowing was of great interest.
Articles related to Infrasound cleaning
Cách tối ưu hóa quy trình thổi bụi than tiên tiến giúp giảm lượng khí thải từ lò hơi
The pressure is on. Every single day, you face a dual mandate that feels almost impossible to balance. On one [...]
Bảo trì dự đoán kết hợp phân tích quy trình thời gian thực cho nồi hơi công nghiệp
The plant floor is silent. That’s the sound that wakes you up at night—the sudden, deafening quiet when a critical [...]
Tối ưu hóa tính bền vững của nhà máy: Tích hợp trí tuệ dữ liệu vào hiệu suất nồi hơi
The Paradigm Shift: From Reactive to Predictive Boiler Management The Old Way (Reactive) Think about the traditional approach. For decades, [...]
