เครื่องทำความร้อนจากเชื้อเพลิงชีวภาพ

A case study and results from our infrasound cleaning installation on a biomass boiler at TPK EPO. Before the installation of the Infrasound generators at TPK-EPO, the multi cyclone and the fintubed economizer were cleaned every 6-8 weeks due to increasing flue gas dP. The economizer is also cleaned with steam soot blowers. After the installation the eco and multi cylone are cleaned once per year.

A case study and results from our infrasound cleaning installation on a biomass boiler at Idbäcksverket. The reason for installing the Infrasound generators on Idbäcksverket was that the steam soot blowing causing extensive damages to the tube bundles, resulting in unplanned stops for repairs.

A case study and results from our infrasound cleaning installation on a biomass boiler at Nässjö affärsverk. Compressed air soot blowing is installed at Nässjö Affärsverk, but relatively ineffective because of the valves being mounted on the turning chamber, far away from the problem area. This results in the air pressure not reaching the problem area.

The infrasound system was installed in order to increase the efficiency of the boiler, by saving soot blowing steam, and to reduce wear on the tube bundles and the catalyst elements. The staff had concluded the damage of the catalyst elements was related to operation of the steam soot blowers.