Smoke tube boiler illustration

Smoke tube boiler

The smoke tube boiler is a type of boiler where flue gas is passing on the inside of many tubes, which creates many challenges for a fouling prevention system. Often the boilers cannot be operated the full operational year.

Smoke tube boiler illustration

General info

Smoke tube boiler cleaning

In heating plants and saw-mills, a cost-efficient and compact way to recuperate the energy in the hot flue gas, is by means of a smoke tube boiler. As the name suggests in a smoke tube boiler, the flue gas passes inside tubes, surrounded by a water mantle cooling the smoke tubes. The boilers are often mounted vertically and have a few tube passes with several hundreds of tubes inside the boiler.

On-line cleaning of smoke tube boilers is challenging and must often be combined with manual cleaning as well. Traditional cleaning methods include compressed air blowing from the top of the boiler as well as manual cleaning of each individual tube. For the manual cleaning, the boiler must often be taken offline and an oil-fired boiler can be necessary to compensate the production loss. The manual cleaning is a dangerous work that can take much time and cost both man hours and oil consumption.

Most commonly, the fouling of a smoke tube boiler starts in the bottom turning chamber, where there is no automatic cleaning and where the compressed air blowing from the top does not reach. The fouling mechanism includes accumulation of so called “beard” at the inlet of the smoke tubes. As the beard grows, it is sucked into the tubes and eventually clog them. Since each tube constitutes for 0.5 % of the heat transfer area of the pass, heat transfer is quickly deteriorated resulting in losses in thermal efficiency. Using long range infrasound, the smoke tubes are kept open in the bottom, avoiding said losses and prolonging the time between outages for manual cleaning.

Download Fact sheet


Our solutions for Smoke tube boilers

Infrasound cleaning
CFD Simulation
Operation analysis

References on Smoke tube boilers


Södra Wood, Långasjö, Sweden

A case study and report from our Infrasound cleaning installation at Södra Wood, Långasjö, Sweden. The goal with the Infrasound Cleaner projects at Södra Wood was to reduce the need for manual cleaning and auxiliary firing due to the reduced number of stops.


Tidaholms energi, Tidaholm Sweden

At Tidaholms Energi, Compressed air soot blowing is installed but relatively ineffective because of the valves being mounted on the turning chamber, far away from the problem area. This results in the air pressure not reaching the problem area.

More references