Power Boilers | Heat Management

Heat Management Landede 3 nye indkøbsordrer i løbet af sommeren 2024!

Introduktion I løbet af sommerferien har vi haft travlt! Vores sælgere og projektteams har arbejdet klogt i de varmere måneder og tiltrukket flere spændende muligheder. Denne vækst i vores fremtidige referencer vil gøre det muligt for os at udvide som virksomhed og fortsætte med at tilføje værdi til både nye og tilbagevendende kunder, som udforsker resten af vores løsningsportefølje. Følgende indkøbsordrer er kommet ind i løbet af sommeren: High Impact Sootblowing System (HISS®) Juli: En papirmasse- og papirfabrik i Brazil Carryover Early Warning System Juli: En papirmasse- og papirfabrik i Sverige. En tilbagevendende kunde, som også har HISS® Infrasound cleaning August: Et affaldsenergianlæg i Tyskland, Steinmüller Engineering leverer endnu en infralydsrenser, hvilket markerer slutkundens femte infralydsrenser. Brasilien Vores nye brasilianske kunde bestilte HISS® i slutningen af juli. Dette andet HISS®-projekt i Brasilien vil være en vigtig reference for Heat Management på det sydamerikanske marked. Projektets mål er at spare damp til [...]

Ved Karl-Henrik Krantz|2025-04-23T13:45:50+02:0018. september 2024|Nyheder, Tidligt varslingssystem for overførsel, Infralydrengøring, Optimerede artikler om dampblæsning, Kedler, Genvindingskedler|Kommentarer lukket

Læs mere

Begrænsning af NOx-gebyrer: Rollen for Heat Management's løsninger

NOx-bøder og hvorfor det er vigtigt at forstå dem. Nitrogenoxider (NOx) udgør en betydelig miljømæssig udfordring, primært på grund af deres skadelige indvirkning på luftkvaliteten og bidrag til dannelse af ozon i stuehøjde og sur regn. Tilsynsmyndigheder over hele verden har indført strenge standarder for NOx-emissioner, hvilket har ført til pålæggelse af bøder til anlæg, der overskrider disse grænser. Denne artikel udforsker fænomenet NOx-emissioner, deres miljøpåvirkninger og hvordan Heat Management's patenterede High Impact Sootblowing System (HISS®) og infralydrengøring kan hjælpe anlæg med at reducere disse emissioner og tilhørende bøder. Udfordringen ved NOx-emissioner Nitrogenoxider er en gruppe gasser, der primært produceres under forbrændingsprocesser ved høje temperaturer. NOx-emissioner bekymrer forskellige industrier, især dem, der er afhængige af forbrændingsanlæg, såsom kraft- og varmeværker, papirmassefabrikker og skibskedler. De vigtigste kilder omfatter køretøjer, industrielle processer og energiproduktion, hvor kraft- og indfyringskedler i den industrielle sektor er væsentlige bidragydere. Miljøpåvirkningen [...]

Ved Karl-Henrik Krantz|2025-04-23T13:50:21+02:0027. juni 2024|Optimerede artikler om dampblæsning, Infralydrengøring, Kedler, Genvindingskedler|Kommentarer lukket

Læs mere

Record Number of Orders in the year of 2023 for Infrasound Cleaning Systems

Heat Management’s Infrasound cleaners has been exceptionally popular historically in Sweden, which is its country of origin. The acoustic cleaner has satisfied its users for years, but in the last few years the demand outside of Sweden has grown exponentially. This has led to a record year for Heat Management, having a lot of Infrasound cleaners to install and commission all over the world, especially in Asia. New exciting partnership in Southeast Asia Our sales manager in Thailand, Thierry Magne, has signed a partnership with Eco Plant Services (EPS) who has been providing our acoustic cleaning solution to the market. Heat Management has received multiple orders in Thailand with the help of our new partner. With the continued collaboration with EPS and Heat Management, anything is possible, which makes the market in Thailand look very promising. The end-users have been everything from cement plants, coal fired boilers to smoke tube boilers. Together we’re building success stories together with our [...]

Ved Karl-Henrik Krantz|2024-01-25T15:05:40+01:00januar 25, 2024|Infralydrengøring, Nyheder, Kedler|Kommentarer lukket

Læs mere

Sustainable Steam: Jönköping Energi’s HISS Project and its Impressive Results

In 2023, the Swedish power plant Jönköping Energi initiated a project that enabled them to increase their boiler load with biofuel. The outcome of that project was a significant increase in heat and electricity production. This however significantly increased their need for sootblowing. Introduction The project that enabled the green transition to more sustainable fuels was finished in the year of 2022. Doing an analysis of that project, Jönköping Energi concluded that they had increased their heat generation by 23 GWh more heat that reduced the need for more expensive fuels and 4 GWh increased electricity production. After the project that enabled the forementioned load increase, Jönköping discovered that even though they had to be sootblowing more as a consequence of increasing their boiler load, there was an add-on solution to their sootblowers that could save them time and steam for each cycle. The High Impact Sootblowing System (HISS®). Since 90% of the cleaning effect is done by the initial [...]

Ved Karl-Henrik Krantz|2025-04-23T14:18:54+02:00januar 4, 2024|Nyheder, Optimerede artikler om dampblæsning, Kedler|Kommentarer lukket

Læs mere

Acoustic Cleaning: A Step to Constant Boiler Availability

Plugging and reduced heat transfer When being exposed to fouling, heat-transferring surfaces lose effectiveness over time due to scaling and buildup. This keeps power boilers from reaching their full potential. To unlock the potential of the boiler, it requires cleaning. One way that most plants around the world do this is by manually cleaning the desired area during a designated stoppage. This, however, poses a major loss in energy production. In this section we present three plants that had major issues with this before implementing acoustic cleaning. Click on their name to download an in-depth case study: Mälarenergi, Kraftvärmet Block 6: A Swedish waste-to-energy plant that had to stop their boiler operation, to sandblast the economizer every 3-6 months. Sandviksverket, Växjö: A Swedish CFB boiler, fuelled by biomass, that reduced their sootblowing steam consumption by 50% in the air preheater and economizer. The acoustic cleaner also fully eliminated the need to sootblow in the catalyst. EEW Delfzijl, Holland; [...]

Ved Karl-Henrik Krantz|2023-10-26T11:12:38+02:00oktober 26, 2023|Infralydrengøring, Kedler|Kommentarer lukket

Læs mere

Unveiling the Silent Culprit: Increased Fuel Consumption due to Fouling

The combustion boiler is at the heart of many operations. Whether it’s a power boiler operating in a combined heating plant or a recovery boiler in a pulp and paper mill. They enable processes to run smoothly and efficiently if maintained right. The boilers have a universal enemy that not only affect their efficiency but also the bottom line– fouling. One of the most overlooked consequences to heavy fouling Is increased fuel consumption. It is therefore important to mitigate the issue before the consequences get unbearable. Why does fuel consumption increase due to fouling? The overall performance of the boiler relies heavily on efficient heat exchange. The heat must flow from combustion chambers to water, generating steam that is essential for different processes in the combustion plant. The deposit buildup on boiler surfaces disturbs the heat exchange, this notion is well documented and fairly agreed upon. The hidden culprit though, is that in order to maintain the same steam [...]

Ved Karl-Henrik Krantz|2025-04-23T14:24:48+02:00september 1, 2023|Optimerede artikler om dampblæsning, Kedler, Genvindingskedler|Kommentarer lukket

Læs mere

LÆR MERE

KONTAKT OS

BESØG OS

Nyhedsbrev