Om Felix Olivecrona

Denna författare har ännu inte fyllt i några detaljer.
So far Felix Olivecrona has created 80 blog entries.

Acospector™ Process Analytics: Real-Time Monitoring for Predictive Boiler Maintenance

Your plant goes quiet. The silence is deafening, broken only by the frantic ringing of your phone. It’s the sound of lost production, of cascading failures, and of a budget spiraling out of control. For too long, plant managers and engineers have been trapped in this reactive cycle. You fight fires, patching problems as they erupt, all while knowing the next emergency is just around the corner. Even traditional preventive maintenance is a gamble—a costly, time-based ritual that often services equipment that doesn’t need it, or worse, completely misses a catastrophe brewing just beneath the surface. But what if you could see the future? What if you could know, with certainty, that a critical failure was developing days or even weeks before it brought your operations to a halt? This isn't science fiction; it's the reality of predictive maintenance, a strategy built on data. And the key to unlocking that data is Acospector™ Process Analytics, the technology that provides the [...]

Av |2025-11-10T14:14:44+01:00november 10, 2025|Kunskap|Kommentarer inaktiverade för Acospector™ Process Analytics: Real-Time Monitoring for Predictive Boiler Maintenance

Möt Marina Vazhnova, automationsingenjör på Heat Management

We are happy to welcome Marina Vazhnova to Heat Management. She works as an Automation Engineer and is currently involved in several projects in Finland. Marina brings valuable experience from power plant automation and process optimization, and she is already making an impact in improving system performance and energy efficiency. In this interview, she shares her thoughts on automation, sustainability, and what it is like to work at Heat Management.   Q: What does it mean to be an Automation Engineer for Heat Management? Being an Automation Engineer here means making sure our control systems run smoothly and reliably in tough industrial environments. It is about finding smart and practical ways to improve processes, reduce manual work, and help our technology perform at its best.   Q: What’s the biggest challenge working with software for sootblowers? The challenge is balancing precision with reliability. The systems need to be accurate enough to optimize cleaning but also robust enough to handle tough [...]

Av |2025-11-06T13:53:40+01:00november 6, 2025|Medarbetarintervjuer|Kommentarer inaktiverade för Meet Marina Vazhnova, Automation Engineer at Heat Management

Revolutionerar sotblåsning: Vårt nya ställdon med flera positioner

Revolutionizing Sootblowing: Our New Multi-Position Actuator For years, the steam valves on sootblowers have relied on mechanical opening and closing mechanisms. While these solutions have served the industry well, they are subject to wear over time, which can compromise operational reliability and increase maintenance costs. In many plants, operators have turned to direct control of steam valves as an alternative. However, this approach has traditionally been limited to colder parts of the boiler, where cooling steam flow is not required. In hotter sections, the need for a cooling steam flow is critical to protect the lance from extreme temperatures. This limitation has made modernization a challenge. At Heat Management, we have been working for several years to rethink how sootblowers can operate more efficiently. Our goal has been to reduce steam consumption, optimize the cleaning process, and increase overall plant availability. Today, we are proud to introduce a new multi-position actuator that takes these improvements to the next level. [...]

Av |2025-10-29T21:57:56+01:00september 19, 2025|Nyheter|Kommentarer inaktiverade för Revolutionizing Sootblowing: Our New Multi-Position Actuator

Vi utökar vår räckvidd i Sydamerika: Möt Mario de Melo

Utökar vår närvaro i Sydamerika: Möt Mario de Melo Vi är glada över att välkomna Mario de Melo som Heat Management vår nya representant i Sydamerika. Med stark teknisk expertis och regional insikt kommer Mario att bidra till att utöka vår räckvidd och ta våra lösningar till nya marknader. Efter att ha kontaktats via vår försäljningschef Johan Holmér tog vi chansen att ställa några frågor till Mario om hans bakgrund och potentialen för Heat Management verksamheten i regionen. Q: Kan du förklara din bakgrund? Jag är en brasiliansk maskiningenjör med en stark resultatdrivande ledarprofil och gedigen erfarenhet av försäljning och servicehantering, affärsutveckling, kontraktshantering och projektledning. Jag arbetade i 15 år inom ledande företag inom pappers- och massaindustrin, med fokus på kemisk återvinning, energiförsörjning och kapitalprojekt. Senare arbetade jag i 16 år för Diamond Power International Inc., ett amerikanskt företag, där jag ansvarade för affärsutveckling i Sydamerika. Q: Vad [...]

Av |2025-08-14T11:58:44+02:00augusti 14, 2025|Intervjuer med partner|Kommentarer inaktiverade För att utöka vår räckvidd i Sydamerika: Möt Mario de Melo

Heat Management welcomes Mårten Ekberg

We're happy to welcome Mårten Ekberg to the team! He joins us as a Sales Manager, bringing solid experience from his previous role at Diamond Power, where he worked with sootblowers and related equipment. With his background and hands-on industry knowledge, Mårten is a great addition to the team. We had a quick chat with him to hear more about his journey so far and what he's looking forward to in his new role.   Q: Can you describe the atmosphere at Heat management? The atmosphere at Heat Management is defined by a friendly, can-do, entrepreneurial spirit and an open-minded environment — something I truly appreciate. It’s also a company where people are deeply committed to their work and willing to go the extra mile to reach their goals.   Q: Can you tell us about your earlier experience from the power plant industry? I have worked with the heat, power, and pulp & paper industries, as well as other [...]

Av |2025-08-28T22:22:53+02:00juni 26, 2025|Medarbetarintervjuer|Kommentarer inaktiverade för Heat Management welcomes Mårten Ekberg

Meet Felix Olivecrona, our new Sales Coordinator

Felix Olivecrona joined us back in August last year. We finally did a Q&A with him so you could get to know him better. Welcome aboard Felix, good luck in your new role!   Q: What does it mean to be a Sales Coordinator for Heat Management? Being a sales coordinator for Heat Management means being the central support for our sales managers and representatives all over the world. Since every market and colleague is different, no two days are the same. In short, it’s hectic in the best of ways, and there’s always something new to do.   Q: What do you enjoy most about your work? What motivates you? Probably the variation of tasks. Not knowing exactly what the day might bring is exciting and keeps me motivated to be proactive. Also, since I had no previous experience in cleantech or with boilers in general, learning about the technology and industry in general has been very interesting. I’ve [...]

Av |2025-08-28T22:30:38+02:00maj 22, 2025|Medarbetarintervjuer|Kommentarer inaktiverade för Meet Felix Olivecrona, our new Sales Coordinator
Gå till toppen